Table of Contents MINIATURE HORSE Pleasure Carts Roadster Carts Obstacle Carts Covers & Accessories Viceroy Cart Jerald Runabout (Easy Entry) PONY Pleasure Carts Fine Harness Carts Roadster Bike Carts Covers & Accessories Jerald Runabout (Easy Entry) STANDARD HORSE Pleasure Driving Carts Fine Harness Viceroy Roadster Carts Jerald Runabout (Easy Entry) RACING CARTS Jerald Golden J Jerald Super J Jerald Standard Jerald Easy Rider Cart Accessories & Covers Wheels, Fenders and Hubs Jerald Runabout (All Sizes) HARNESSES (All Sizes) MYLER DRIVING BITS EquiPage Foaling Alarm Paging System EquiFone Foaling Alarm System Milk Strips Foaling Prediction Strips Halter & Harness Bags Driving Whips Cart Number Holders Ken & Cynthia Porter 9219 99th Ave Arlington, Washington 98223 USA Phone/Fax: 360-653-7928 E-Mail: ken@horsecarts.com www.horsecarts.com Worldwide Shipping

Estate Horse Supply HorseCarts.com e-Store Don't Let this happen to you!!   The above bit is a cheap foreign copy that is being advertised by some tack dealers as comparable to the Myler driving bits. They are not comparable.   Fortunately, the person using this bit was driving in a small arena with several other people and they were able to stop the horse before a serious accident occurred.  These cheap bits are made from a pot metal type material and they are coated to appear as stainless steel.  Don't be fooled by these knockoff bits.  Quality and safety cannot be faked. MYLER DRIVING BITS Handcrafted Non- Pinch Bits - Made In The USA ESTATE HORSE SUPPLY is very proud to be an official Dealer of Myler Bits. We feel the driving industry is in need of high quality correctional bits that are not abusive. Research completed and information outlined in the Myler authored book titled A WHOLE BIT BETTER is a reading must for any serious driver. FEATURING THE BOOK & DVD BY: DALE, RON & BOB MYLER "A WHOLE BIT BETTER" Effective Communication Through Proper Bitting and Relaxation "A WHOLE BIT BETTER"      BOOK AND DVD $24.00 "Contains the most common-sense and practical approach to bitting I've seen. The Mylers are the first bitmakers to truly understand the horse's mouth. They have designed bits that make sense, both from a practical and scientific standpoint" Dr. Joyce C. Harman, DVM, MRCVS MYLER BITS Handcrafted Bits - Made In The USA LEVELS OF BITS: All Myler Bit mouthpieces are coordinated to the levels of training. Some bits are appropriate for multiple levels. Level One Bits: + Feature curved mouthpiece with tongue relief for swallowing. + Use tongue pressure and bar pressure - working mostly off the tongue. + Offer a variety of pressure points to take the horse as soft as they will allow. May use tongue, curb, poll and/or palate pressure as needed. + May feature and/or offer independent side movement. + Feature pinch & restrict with release Level Two Bits: + Feature curved mouthpiece with tongue relief for swallowing. + Use tongue pressure and more bars. May collapse into the bars. + May feature curb, palate and/or poll pressure Level Three Bits: + Feature curved mouthpiece with tongue relief for swallowing. + Use mostly bar pressure; mouthpiece rolls downward on the bars. + May feature and/or offer independent side movement. + May feature hooks and/or offer independent side movement. MYLER METALS: (Please see photos below) Stainless Steel: A rust-free metal alloy known for its strength and durability. Can dry the mouth. Sweet Iron: A strong metal with a sweet taste as it slowly rusts. Encourages the horse to salivate. Copper Inlays: Small strips of copper are placed in the mouthpiece to encourage salivation. ALL BITS STOCKED ARE STAINLESS STEEL WITH COPPER INLAY, AVAILABLE IN THE FOLLOWING MOUTHPIECE SIZES AND WIDTHS 1. Miniature Horse / Pony sizes: 5/16" mouthpiece in bit widths of 3" - 41/2" in 1/4" increments. 2. 1/4"(SS) twisted square bar in all widths 3. Horse sizes: 3/8" mouthpiece in 43/4" - 51/2" widths in 1/4" increments. * * * SPECIAL ORDER BITS IN ALL SIZES * * * 1. All bits available in Sweet Iron mouthpiece (also available with copper inlay). 2. SS without copper inlay 3. 1/4" twisted SS wire 4. Mouthpiece sizes available: 1/4", 5/16", 3/8", 7/16" WE STOCK A LARGE SELECTION OF BITS EPB 01 MYLER COMFORT SNAFFLE Collapses into the corner of the bars, goes into the tongue as a short shank snaffle without pinching the tongue but allowing the pick up of either shoulder independently. Level: One Usage/Solution for: The Myler Comfort Snaffle mouthpiece is an excellent alternative to a regular, nutcracker-like Snaffle. Unlike a regular Snaffle, it features independent side movement allowing a driver to isolate one side and lift the shoulder. Working primarily off the tongue and bars, the Comfort Snaffle is useful for bending and balancing the beginning horse. EPB 01 MYLER COMFORT SNAFFLE  $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order EPB 04 Same as EPB 01- Except has moderate port for partial tongue relief. EPB 04 MYLER COMFORT SNAFFLE  $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order EPB 36 MULLEN VERTICAL PORT BARREL Puts pressure on the corners of the bars. Each side of the mouthpiece moves independently allowing the driver to isolate one side or the other to lift a shoulder. Turns into a solid mouth when asking for a stop. Level: Three Usage/Solution for: This bit is for the rock solid steady finished horse. Driver must have experienced, steady hands. Being a vertical ported bit, this bit offers the maximum comfort and tongue relief for a horse. (Improper use can cause a bit to hit the roof of the mouth.) EPB 36 MULLEN VERTICAL PORT BARREL $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order EPB 32 MYLER MULLEN BARREL Puts pressure on the tongue and corners of the bars. Each side of the mouthpiece moves independently allowing the driver to isolate one side or the other to lift a shoulder. turns into a solid mouth when asking for a stop. Level: Two, Three Usage/Solution for: The Myler Muller Barrel mouthpiece is a good choice for the finished horse. With the strength of the solid Mullen mouth, this bit encourages the horse to break at the poll, but keeps him from getting behind the bit, or inverting. The independent side movement allows the driver to isolate one side and pick up a shoulder. EPB 32 MYLER MULLEN BARREL $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order EPB 32 HP MYLER MULLEN BARREL Same as EPB 32 except has moderate port for partial tongue relief $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order EPB 43 HP Same as EPB 32 except has high port for maximum tongue relief. EPB 43 HP Myler Bit $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order   EPB 40 MYLER HINGED CORRECTIONAL MULLEN BARREL Puts down pressure on the tongue and collapses on the bars. Each side of the mouthpiece moves independently allowing the driver to isolate one side or the other to lift a shoulder. Level: One, Two Usage/Solution for: This is an excellent bit to move up from the Snaffle. Independent side movement allows the driver to isolate one side and lift the shoulder. The mouthpiece is useful for bending, balancing and for horses which invert. Ideal for the horse that drives to one side. EPB 40 MYLER HINGED CORRECTIONAL MULLEN BARREL $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order EPB 40 HP Same as EPB 40 - except has maximum tongue relief. Ideal for the horse that does not tolerate tongue pressure. EPB 40 HP MYLER HINGED CORRECTIONAL MULLEN BARREL $149.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock 1/4" stainless steel twisted square bar - in stock Sweet Iron with Copper Inlay - Special Order Sweet Iron - Special Order Stainless Steel without Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order COPPER INLAY Helps produce salivation TWISTED BAR Ported bit - Recommended only for horses with heavy callused mouth. PERCH - Bridle & over check (if used) is placed through, and this keeps bit in horizontal position of mouth at all times. Rein Bar - keeps side check in proper location and keeps reins in correct horizontal position Outside Ring - normal rein position Rein Bar Ball - to keep side check (if used) above center. E-09 Snaffle...only $99 $99.00 Select mouthpiece size Miniature Horse or Pony 5/16" mouthpiece - Standard Horse 3/8" mouthpiece - Standard Special Order1/4" mouthpiece Special Order 7/16" mouthpiece Select bit width Bit width 3" (Miniature or Pony) Bit width 3 1/4" (Miniature or Pony) Bit width 3 1/2"(Miniature or Pony) Bit width 3 3/4"(Miniature or Pony) Bit width 4" (Miniature or Pony) Bit width 4 1/4" (Miniature or Pony) Bit width 4 1/2" (Miniature or Pony) Bit width 4 3/4" (Horse) Bit width 5" (Horse) Bit width 5 1/4" (Horse) Bit width 5 1/2" (Horse) Select bit type Stainless Steel With Copper Inlay - Standard in stock Sweet Iron - Special Order Sweet Iron With Copper Inlay - Special Order 1/4" twisted stainless steel wire- Special Order 1/4" twisted copper steel wire- Special Order E09 Stainless Steel Traditional Snaffle Bit W/Copper Inlay   Ken & Cynthia Porter 9219 99th Ave Arlington, Washington 98223 USA Phone/Fax: 360-653-7928 E-Mail: ken@horsecarts.com www.horsecarts.com Worldwide Shipping Visa, Master Card Accepted Prices F.O.B. Arlington, WA USA Except Cart Prices which are FOB Factory